Search found 15 matches

by cloudd
Wed Feb 20, 2019 4:37 pm
Forum: MiSTer
Topic: PC Engine core
Replies: 252
Views: 45427

Re: PC Engine core

@Sorgelig I am not sure the problem you are speaking of is the same problem as I was having? My problem seems to be fixed after deleting the files I mentioned above. When I first started using Mister I never had this problem with the Turbo Grafx/PC Engine Core. It just started happening in the last ...
by cloudd
Wed Feb 20, 2019 2:00 am
Forum: MiSTer
Topic: PC Engine core
Replies: 252
Views: 45427

Re: PC Engine core

*UPDATE 2* The problem is so bad that the Turbo Grafx/PC Engine core only loads video about 50% of the time when I boot up the mister. *This seems to have fixed the issue after testing 10 reboots and loading the Turbo Grafx/PC Engine core* 1. Put the mister SD card in a Windows PC and delete the fol...
by cloudd
Mon Feb 18, 2019 12:55 am
Forum: MiSTer
Topic: PC Engine core
Replies: 252
Views: 45427

Re: PC Engine core

*UPDATE* - I have found the following problem: When the Mister PC Engine core successfully loads a rom and I do a cold reboot from the Mister Core menu or using the reboot button on the AIO v5.3 board, then load the pc engine core again. I immediately find that the same rom I had previously been pla...
by cloudd
Sun Feb 17, 2019 6:40 pm
Forum: MiSTer
Topic: PC Engine core
Replies: 252
Views: 45427

Re: PC Engine core

When using HDMI and loading a game rom sometimes I get a black screen and can hear the game playing but I can't see it. Doing a warm reboot as well as a cold reboot and reloading the rom again does not fix the problem. Unplugging the the power from the wall and applying it again usually works but so...
by cloudd
Sun Feb 17, 2019 6:21 pm
Forum: MiSTer
Topic: PC Engine core
Replies: 252
Views: 45427

Re: PC Engine core

I can add a way to finish remapping by pressing OSD button, so keyboard won't be required. The remaining will be the same as it's really depends on specific game. I don't see a problem to remap the button when specific game is used. R-Type is just one of few games where autofire doesn't allow to us...
by cloudd
Thu Feb 14, 2019 9:10 pm
Forum: MiSTer
Topic: PC Engine core
Replies: 252
Views: 45427

Re: PC Engine core

That would definitely help and allow for the game to be played the way I remember it. But really a way to map 2 buttons for “I” and “II” for the pcengine core default 2 button controller configuration would be best. Or as another option A way to save the addional button mappings on a per game basis....
by cloudd
Thu Feb 14, 2019 5:36 pm
Forum: MiSTer
Topic: PC Engine core
Replies: 252
Views: 45427

Re: PC Engine core

The problem is that activating and deactivating the turbo-fire on a button is not a simple press of another button on the Mister. Using multiple buttons to activate and deactivate the turbo-fire in the middle of fighting a boss or racing (moto roader II), complicates the process taking away from the...
by cloudd
Wed Feb 13, 2019 10:23 pm
Forum: MiSTer
Topic: PC Engine core
Replies: 252
Views: 45427

Re: PC Engine core

you cannot save it. The name of this function clearly tell it's re-map for a game. Different game may have different combinations for extra buttons. So it's temporary remap. I don't want to map random buttons for each game. I just want 2 permanent auto-fire buttons for the Button "I" &...
by cloudd
Wed Feb 13, 2019 4:36 pm
Forum: MiSTer
Topic: PC Engine core
Replies: 252
Views: 45427

Re: PC Engine core

It is my fault. I just did not read the instructions correctly on the screen. :? Is there anyway to save this additional button configuration for the core or is this supposed to reset upon rebooting the mister? It does not seem to save the configuration If I select “save settings” and reboot the mis...
by cloudd
Wed Feb 13, 2019 3:00 am
Forum: MiSTer
Topic: PC Engine core
Replies: 252
Views: 45427

Re: PC Engine core

Thank you, that helped me too. Though you first press the destination key then the source key,, reverse from intuition. :) I agree this is REVERSE FROM INTUITION. It should be the source button and then the destination button. Still a sweet additional option. Is there anyway to save this configurat...
by cloudd
Tue Feb 12, 2019 8:50 pm
Forum: MiSTer
Topic: PC Engine core
Replies: 252
Views: 45427

Re: PC Engine core

It's already implemented .You can use the option "Button/key remap from for game" in osd to remap the fire buttons ( two button with the same action ), and apply auto fire in only one of the buttons, this work in all cores . Amazing! I did not understand that I could do that. Thank you :D
by cloudd
Tue Feb 12, 2019 6:48 pm
Forum: MiSTer
Topic: PC Engine core
Replies: 252
Views: 45427

Re: PC Engine core

Does anyone else have an interest in adding add 2 separate turbo fire buttons for button "I" & "II"? This feature currently exist in other emulators. The turbo fire buttons are mapped to X & Y on Xbox controllers. The reason I ask is that even though there is a way to ini...
by cloudd
Thu Dec 13, 2018 3:31 am
Forum: MiSTer
Topic: I/O Board
Replies: 318
Views: 112766

Re: I/O Board

Newbie here. I have already been playing my de10 nano with mister and a OTG USB hub connected. The keyboard and USB controller work with no problems. I just received 2x AIO complete boards v5.3 from retro shop. Once I have 1 of the boards attached to the de10 nano. I plug in my usb hub with keyboard...
by cloudd
Thu Oct 25, 2018 5:52 am
Forum: MiSTer
Topic: Local Sellers for MiSTer Expansion Boards
Replies: 419
Views: 166671

Re: Local Sellers for MiSTer Expansion Boards

I am willing to solder my own. Can someone ship me the parts in Canada and accept payment through PayPal? I am looking for the boards with all the components


-sdram card w/ all components
-I/O card with all components and fan
-rtc card with components

PM if you can sell them to me.
by cloudd
Wed Oct 24, 2018 5:22 pm
Forum: MiSTer
Topic: Local Sellers for MiSTer Expansion Boards
Replies: 419
Views: 166671

Re: Local Sellers for MiSTer Expansion Boards

Hi, I am located in Canada and looking to purchase the following parts:

- a fully populated I/O board 5.5
- SDRAM XS 1.1 (vertical mount)
- RTC board

I can pay via PayPal
Please PM me.

Go to advanced search