Search found 24 matches

by lolof
Sun Sep 08, 2019 11:42 am
Forum: MiSTer
Topic: SDRAM board
Replies: 272
Views: 97886

Re: SDRAM board

Here was perfect @167Mhz Now it's working @140Mhz on my 32MB xs 1.1 board, above I have also instantly mistakes. What is the blue number near the green one ? When you say "better results with mixed caps", is there a special order to solder them or we can randomly solder the 3 different val...
by lolof
Sat Sep 07, 2019 6:45 pm
Forum: MiSTer
Topic: SDRAM board
Replies: 272
Views: 97886

Re: SDRAM board

If you have them for $11. You can alredy be happy I think.

If you buy a lot. You'll have them under $11 :-)
by lolof
Sat Sep 07, 2019 5:57 pm
Forum: MiSTer
Topic: NeoGeo topic
Replies: 159
Views: 10054

Re: NeoGeo topic

Oh yes, faster than light...
I try the other one yesterday evening :-)

Thanks, I will try it.
by lolof
Sat Sep 07, 2019 5:38 pm
Forum: MiSTer
Topic: NeoGeo topic
Replies: 159
Views: 10054

Re: NeoGeo topic

With the core from yesterday, I have a lot of graphical glitches. Even the "NeoGeo" logo at boot has graphical glitches before it start rotating. On previous unofficial realise, I did not had this that much. My MiSTer is uptodate. Am I the only one ? I ask this because I am only reading po...
by lolof
Fri Sep 06, 2019 6:35 pm
Forum: MiSTer
Topic: SDRAM board
Replies: 272
Views: 97886

Re: SDRAM board

On the pdf from XSD 2.4 board, it's written "AS4C16M16SA-6TCN‎".

AS4C16M16SA-6TCN‎ = 32MB from old board

Should be AS4C32M16SA I think. There is also AS4C32M16SB...

-6TN is not available. -7 does the trick ?

EDIT : AS4C32M16SB-6TIN available...
by lolof
Tue Aug 06, 2019 7:51 pm
Forum: MiSTer
Topic: USB Hub board
Replies: 202
Views: 77744

Re: USB Hub board

Just saw the reply.

Ordered...

Thank you very much
by lolof
Sun Aug 04, 2019 9:53 pm
Forum: MiSTer
Topic: Buying de10 nano in Europe (Spain).
Replies: 20
Views: 3807

Re: Buying de10 nano in Europe (Spain).

Yes, so I did here in DE.
by lolof
Thu Jul 11, 2019 2:32 pm
Forum: MiSTer
Topic: USB Hub board
Replies: 202
Views: 77744

Re: USB Hub board

I am looking for 2X USB connector for the L shape connector.

Does someone know a source. They are all sold on the aliexpress link :-(
by lolof
Sun May 12, 2019 11:12 am
Forum: MiSTer
Topic: USB Hub board
Replies: 202
Views: 77744

Re: USB Hub board

I put a 0 Ohm resistor on the L-shap bridge to get the USB board powered by the nano. This works well for me.

I did tried to power the nanode10 only through the USB Hub (while 0 ohm resistor in place). This does not work.
by lolof
Fri May 10, 2019 9:10 pm
Forum: MiSTer
Topic: Genesis Core
Replies: 453
Views: 82222

Re: Genesis Core

20190503 gave me black screen with sound.

Problem solved with 20190510
by lolof
Wed May 01, 2019 11:35 am
Forum: MiSTer
Topic: USB Hub board
Replies: 202
Views: 77744

Re: USB Hub board

Sorry yes, micro-USB and I was also speaking about the J1 pin you solder on your board for the power.... Thanks for the reply. I will experiment with power from the L-shape connector on my usb hub and see if it's enough. The boards I won't use will be for sale. What is for you the best option to pow...
by lolof
Tue Apr 30, 2019 6:45 pm
Forum: MiSTer
Topic: USB Hub board
Replies: 202
Views: 77744

Re: USB Hub board

Using L-shaped USB connector on usb board 1.2 : - Is there an advantage to solder the USB-mini connector on the USB 1.2 board ? - On your picture, I can see you power the board through a pin connected on J2. It must be so ? Could I use instead P2 (2) to power the USB board ? Thank you very much for ...
by lolof
Fri Feb 01, 2019 9:15 pm
Forum: MiSTer
Topic: Newbie questions
Replies: 309
Views: 66138

Re: Newbie questions

I feel stupid :-)

Thank you.
by lolof
Fri Feb 01, 2019 6:20 pm
Forum: MiSTer
Topic: Newbie questions
Replies: 309
Views: 66138

Re: Newbie questions

Another question .....

Every time I am starting Genesis for exemple, it start with scanline at 75%.....
I change it to another value but the next start I am starting the core, it comes back to 75....

Is there a config file where I can definitely change the scanline value for each core ? Thanks
by lolof
Thu Jan 31, 2019 10:00 pm
Forum: MiSTer
Topic: Newbie questions
Replies: 309
Views: 66138

Re: Newbie questions

I read the volume audio out from MiSter could be controlled with the volume button from keyboard. Audio go out through analog plug and I have a K400+ Wireless keyboard with volumes buttons. I can't set the volume with the keyboard. Is there something special I should do in order to get the Keyboard'...
by lolof
Wed Jan 23, 2019 8:06 pm
Forum: MiSTer
Topic: Wifi
Replies: 119
Views: 32370

Re: Wifi

Thank you.

I took a look at all the thread and find the solution :

viewtopic.php?f=117&t=32969#p344349

Working like a charm..... The MisTer is connected through wifi now. Read help a lot :-) Thanks again.
by lolof
Wed Jan 23, 2019 6:41 pm
Forum: MiSTer
Topic: Wifi
Replies: 119
Views: 32370

Re: Wifi

Finally found the file located @ /media/fat/linux/_wpa_supplicant.conf

Is it the good one ?

Replace my ssid and password, put my contry code and change name to wpa_supplicant.conf but it's not working :-(
It's not working out of the box :-(

The model is :

XIAOMI Mi Portable Wifi mini Router 150M
by lolof
Wed Jan 23, 2019 5:26 pm
Forum: MiSTer
Topic: Wifi
Replies: 119
Views: 32370

Re: Wifi

Trying to set up wifi.... In wiki they speak about a file /Linux/_wpa_supplicant I coud not find it but instead found one in /etc wpa_supplicant Here is the file : ctrl_interface=/var/run/wpa_supplicant ap_scan=1 network={ key_mgmt=NONE } Is it the good one ? If yes, what exactly should I add to it ...
by lolof
Wed Dec 12, 2018 5:09 pm
Forum: MiSTer
Topic: TI-99/4A on Mister (based on Speccery's)
Replies: 96
Views: 29634

Re: TI-99/4A on Mister (based on Speccery's)

Also tried Barrage but combine the files from Tosec with the Python script available on this thread, I have the same result as your.
I also tried loading .c and .d files, same result.
by lolof
Wed Dec 12, 2018 2:26 pm
Forum: MiSTer
Topic: SDRAM board
Replies: 272
Views: 97886

Re: SDRAM board

Are you using this Windbond ICs ? It seems not worth to spare on 2-3€ and use those.... I built some sdram boards with Alliance AS4C16M16SA-6TIN from Mouser. TIN is for the industrial variant, it's guaranteed to work @85°C. Though, It probably does not matter for the MiSTer. Memtes prog can be a bit...
by lolof
Mon Dec 10, 2018 5:14 pm
Forum: MiSTer
Topic: TI-99/4A on Mister (based on Speccery's)
Replies: 96
Views: 29634

Re: TI-99/4A on Mister (based on Speccery's)

Thanks. The old script did the trick, now it's booting in TI-Basic :-)

I just have to learn how to load games... I am only used to put cartridge in my real TI-99/4A....

Thank you very much.
by lolof
Mon Dec 10, 2018 2:51 pm
Forum: MiSTer
Topic: USB Hub board
Replies: 202
Views: 77744

Re: USB Hub board

I've build the USB hub and have a question. When I plug an USB device like keyboard and mouse the Green LED is on. It's working as it should with keyboard mouse and joypad :-) When should be the amber LED on ? It's never lighting. How can I check if the LED is working with the MiSTer ? LED were chec...
by lolof
Mon Dec 10, 2018 2:44 pm
Forum: MiSTer
Topic: TI-99/4A on Mister (based on Speccery's)
Replies: 96
Views: 29634

Re: TI-99/4A on Mister (based on Speccery's)

It's what I did but my problem is probably because my tiroms.bin is 238KB. But why ?? I did it on XP machine and win10, same results 238KB.....
by lolof
Mon Dec 10, 2018 1:47 am
Forum: MiSTer
Topic: TI-99/4A on Mister (based on Speccery's)
Replies: 96
Views: 29634

Re: TI-99/4A on Mister (based on Speccery's)

Hello, I built the tiroms exactly as explained in the thread (with 994aROM.Bin in /firmware (8KB) ). I end up with 238KB file. I put it in MiSTer /$Roms/TI-99_4A directory. Started the TI core (Ti994a_20180527.rbf) and loaded the tiroms.bin. The screen stay black... Could someone help me and tell me...

Go to advanced search