Search found 174 matches

by NegSol
Sun Jan 21, 2018 10:42 am
Forum: MiST
Topic: The last MIST
Replies: 44
Views: 2511

Re: The last MIST

I already have multiple MiST and am a huge fan and proponent of the FPGA idea. Thanks to Till's great tutorials in a German magazine I even picked up some FPGA development skills myself. I hope the community keeps on running with the MiST idea and will come up with innovative ways of using the resou...
by NegSol
Sat Jan 06, 2018 11:08 pm
Forum: MiSTer
Topic: Minimig (Amiga) core discussion
Replies: 50
Views: 1559

Re: Minimig (Amiga) core discussion

Ok - an outed MiSTer file could be the issue. I will test it tomorrow. Thank you! :cheers:

Edit: It works now :)
by NegSol
Sat Jan 06, 2018 8:18 pm
Forum: MiSTer
Topic: Minimig (Amiga) core discussion
Replies: 50
Views: 1559

Re: Minimig (Amiga) core discussion

I do not get a picture on the HDMI with the T3 version. :|
by NegSol
Fri Jan 05, 2018 7:02 pm
Forum: MiSTer
Topic: MiSTer - Case v1.0
Replies: 67
Views: 6752

Re: MiSTer - Case v1.0

Updated Case for the v2.7 I/O-Boards. I added two new Top Shells now including buttons, the vents of the v5.2 case and an optional fan holding cage. The cage was matched for the noctua 40x40x20 mm fan but it should work well with other fans of similar dimensions. The noctua fan fits without glue or ...
by NegSol
Mon Jan 01, 2018 1:12 pm
Forum: MiSTer
Topic: MiSTer XS Case - v5.2 XS for SDRAM XS - extra slim - v1.1
Replies: 13
Views: 512

Re: MiSTer XS Case - v5.2 XS for SDRAM XS - extra slim - v1.1

Again, I understand. But my modeling skills are crude at best. The OpenSCAD file is a program that can be parameterized and run through a compiler to produce a shape of the case (output is stl). Great to experiment. My take on this is that to get a slimmer fit (looking at the panels) one would have ...
by NegSol
Mon Jan 01, 2018 8:17 am
Forum: MiSTer
Topic: MiSTer XS Case - v5.2 XS for SDRAM XS - extra slim - v1.1
Replies: 13
Views: 512

Re: MiSTer XS Case - v5.2 XS for SDRAM XS - extra slim - v1.1

@Sorgelig: I attach my "unmodified" stls for easier customization (e.g. Panel without any holes). Also find attached the OpenSCAD I use for the outlining of the case. This file can be used to test out tighter tolerances. :) The code is a slightly modified version of the code found in this ...
by NegSol
Mon Jan 01, 2018 8:08 am
Forum: MiSTer
Topic: MiSTer XS Case - v5.2 XS for SDRAM XS - extra slim - v1.1
Replies: 13
Views: 512

Re: MiSTer XS Case - v5.2 XS for SDRAM XS - extra slim - v1.1

New version of the case published:

MiSTer XS Case v2 for SDRAM XS - extra slim - v1.1

All in all 4 mm higher than MiSTer XS Case V1. I also changed the panel cut-out for the vga slightly.

https://www.thingiverse.com/thing:2740925
by NegSol
Sun Dec 31, 2017 11:59 pm
Forum: MiSTer
Topic: MiSTer XS Case - v5.2 XS for SDRAM XS - extra slim - v1.1
Replies: 13
Views: 512

Re: MiSTer XS Case - v5.2 XS for SDRAM XS - extra slim - v1.1

Agreed. I will look into make it bigger. Making the panels thinner is an option, but I cannot promise much here. Making changes to the tolerances could impact a lot of things and would require more testing. We will see. As for the lower hole of the vga, that is kind of useful to have. Fitting and re...
by NegSol
Sun Dec 31, 2017 8:36 pm
Forum: MiSTer
Topic: MiSTer XS Case - v5.2 XS for SDRAM XS - extra slim - v1.1
Replies: 13
Views: 512

Re: MiSTer XS Case - v5.2 XS for SDRAM XS - extra slim - v1.1

@Sorgelig - Nice spotting of the glitch in the button. I uploaded a fixed version for this (-->V6). Movable buttons should be printable now. :mrgreen: Also the niche cut for the VGA should work fine. There is around 1 mm case wall left (more than 5 layers of printing material) - so no problem at all...
by NegSol
Sun Dec 31, 2017 7:52 pm
Forum: MiSTer
Topic: MiSTer XS Case - v5.2 XS for SDRAM XS - extra slim - v1.1
Replies: 13
Views: 512

Re: MiSTer XS Case - v5.2 XS for SDRAM XS - extra slim - v1.1

Thanks for your feedback. I will take another look at this next year. I guess making the vga connector part more spacious has advantages so a heigher case makes sense. I am a little unsure how many people will actually be able to use the case (being for XS sdram only). Therefore I like the universal...
by NegSol
Sun Dec 31, 2017 2:45 pm
Forum: MiSTer
Topic: MiSTer XS Case - v5.2 XS for SDRAM XS - extra slim - v1.1
Replies: 13
Views: 512

Re: MiSTer XS Case - v5.2 XS for SDRAM XS - extra slim - v1.1

I had to do some minor tweaks on the Top Shell part (-->V5). Please download again.
https://www.thingiverse.com/thing:2739031
Update_top.jpg
by NegSol
Sun Dec 31, 2017 12:59 pm
Forum: MiSTer
Topic: MiSTer XS Case - v5.2 XS for SDRAM XS - extra slim - v1.1
Replies: 13
Views: 512

MiSTer XS Case - v5.2 XS for SDRAM XS - extra slim - v1.1

Introducing a new 3D printed case for the MiSTer: MiSTer XS Case - v5.2 XS for SDRAM XS - extra slim - v1.1 MiSTer_Case_XS_cut.jpg -- On request I remixed the MiSTer: Case Universal v5.2 to tightly fit the new SDRAM XS board v1.1. MiSTer Case XS - v5.2 v3_C1_cut.jpg -- The most compact version of th...
by NegSol
Sun Dec 31, 2017 8:41 am
Forum: MiSTer
Topic: MiSTer - Case Universal v5.2 - 3D printed
Replies: 20
Views: 1117

Re: MiSTer - Case Universal v5.2 - 3D printed

Yes - I will print a more less transparent case one day. :D About the connector openings. For some reason it took me quite some time to get them the way they are. One has to take into account that the main board has to be skrewed down and the case has to be assembled at some point. As the I/O board ...
by NegSol
Sat Dec 30, 2017 9:16 pm
Forum: MiSTer
Topic: MiSTer - Case Universal v5.2 - 3D printed
Replies: 20
Views: 1117

Re: MiSTer - Case Universal v5.2 - 3D printed

Here we go: The MiSTer XS Case - first rendered impressions - files will follow in a new thread tomorrow.. :angel:
by NegSol
Sat Dec 30, 2017 7:22 pm
Forum: MiSTer
Topic: MiSTer - Case Universal v5.2 - 3D printed
Replies: 20
Views: 1117

Re: MiSTer - Case Universal v5.2 - 3D printed

Good ideas. I will post a first impression or maybe more soon (nearly done). I tried to stick to mostly proven forms and sizes. I currently do not plan on printing the case myself and changing a lot would require testing (i.e. printing it). I can see your point wanting a smaller case. But there is a...
by NegSol
Sat Dec 30, 2017 3:03 pm
Forum: MiSTer
Topic: MiSTer - Case Universal v5.2 - 3D printed
Replies: 20
Views: 1117

Re: MiSTer - Case Universal v5.2 - 3D printed

Terrific model of yours! Thank you! Should be helpful. :mrgreen:
by NegSol
Sat Dec 30, 2017 1:50 pm
Forum: MiSTer
Topic: MiSTer - Case Universal v5.2 - 3D printed
Replies: 20
Views: 1117

Re: MiSTer - Case Universal v5.2 - 3D printed

I will give it a shot. Not sure if I will get all of the things you request in but I will see what I can do. With the new sdram board one could end up with a pretty small case. :D
by NegSol
Tue Dec 26, 2017 10:43 pm
Forum: MiSTer
Topic: MiSTer - Case Universal v5.2 - 3D printed
Replies: 20
Views: 1117

Re: MiSTer - Case Universal v5.2 - 3D printed

For those still using the v1.2 version of the case and having interest in the new top shell of the v5.2 version with the new vent design. I added a new top file to the old thingiverse page incl. the new vents on the top shell for version v1.2. However. you will have to provide your on fan bracket so...
by NegSol
Tue Dec 26, 2017 6:54 pm
Forum: MiSTer
Topic: C64 Cartridge support
Replies: 59
Views: 2175

Re: C64 Cartridge support

Thank you! I will test it very soon :cheers:
by NegSol
Fri Dec 22, 2017 6:06 pm
Forum: MiST
Topic: New core: Gameboy
Replies: 43
Views: 13597

Re: New core: Gameboy

Cheers!! :cheers:
by NegSol
Tue Dec 19, 2017 8:06 pm
Forum: MiSTer
Topic: C64 Cartridge support
Replies: 59
Views: 2175

Re: C64 Cartridge support

I tested the hex edit on Luftrauserz - worked like a charm. Really great title for the MiST's C64 core. Would be great to get .CRT support on the MiSTer for this alone. I like this version of the game even more than the PC original :mrgreen: - Thanks again for the tip.
by NegSol
Sun Dec 17, 2017 10:54 pm
Forum: MiSTer
Topic: C64 Cartridge support
Replies: 59
Views: 2175

Re: C64 Cartridge support

Great! I will give the hex change a try :) Thx :mrgreen:
by NegSol
Sun Dec 17, 2017 5:53 pm
Forum: MiSTer
Topic: C64 Cartridge support
Replies: 59
Views: 2175

Re: C64 Cartridge support

To my knowledge the source (provided by Lee) was not yet released to public. MiSTer had no CRT support yet. Did you manage to get Luftrauserz to run on the Mist? I only get a loading picture and than it crashes (using latest core release as binary in Sept. 2017 on the facebook group). :shrug:
by NegSol
Thu Dec 14, 2017 8:05 pm
Forum: MiSTer
Topic: Testing: Support for more HDMI resolutions and other changes.
Replies: 22
Views: 695

Re: Testing: Support for more HDMI resolutions and other changes.

Same here no change noticeable - HDMI stays at 720P with my monitor no matter what number is set in the .ini. :shrug:

However, I like the idea of a large range of supported resolutions...
by NegSol
Wed Dec 06, 2017 7:03 pm
Forum: MiSTer
Topic: MiSTer - Case Universal v5.2 - 3D printed
Replies: 20
Views: 1117

Re: MiSTer - Case Universal v5.2 - 3D printed

For all of you looking for a silent fan option for your MiSTer. I tested the Noctua NF-A4x20 FLX 5V connecting it to the 3.3V rail. While it is shoveling quite some air it is now only noticeable when pressing the ear against the case - nothing I like to do often ;-P So for anybody being plagued by a...

Go to advanced search