Atari-Forum

Hello,

Instead of opening the case, you can also check the TOS version.
Tos 4.00 - 4.01 is for very early machines and tos 4.04 for the latest, and most of the available falcons.
The program 'sysinfo. prg' gives you this info.

Mark

Hello,
Ten years ago, I got cab working under magic with the overlay file.
This on a stock falcon030 and a Milan.

However, I tried it recently, and the 'https' sites don't work any-more. As far I remembered CAB always crashed.

Mark

Hello,
CAB.OVL is a networking interface layer for use with CAB

For different versions, see :

ftp://kurobox.serveftp.net:3021/internet/cabovl/

Mark

Working :
Microsoft "Wheel Mouse Optical 1.1A USB and PS/2 Compatible"

I've a SLM 605, with broken PSU.
Is there someone who can repair this ?

Also, I didn't found some diagrams of the PSU in the service manual.


Kind regards,

Mark

Try this :
https://www.dev-docs.org/docs/

I suggest to make a new tread our split this tread.
One thread for 'Atari TT030 and Linux/Debian, etc ...' and an other or this one for 'system V'.

Hello, I use the NetUSBee on my Falcon with magic 6, magicnet and umouse. As mouse I use the USB MS "Wheel Mouse Optical 1.1A USB and PS/2 compatible", connected to the NetUSBee. This is the mouse with the red light. This setup works fine. However I'm very interested to use your program wi...

Something silly, But after you removed the CT63 board, did you replaced the jumper on the expansion connectors ? (See screenshots of Falcon MB) At the other hand, I got also a problem that a Falcon didn't give a screen in VGA mode. After some investigation, I got a screen on a the B/W monitor, so th...

I don't use the resolution selector anymore.
The Sblaster works under mint and Magic.
It boots automatic in 800/608/16
With 256 I get stability issues.

That's what I have.
Same hardware, only different software.

I use it without hardware, only the software, and use it in +/- 800/600 16 colors

Doc is in German, so a good starter to learn that language.

Mark

Hello, I didn't install it myself, so I don't have any idea if NetBSD it is slow, or quick. I only use Magic and Mint. And I prefer Magic :mrgreen: I don't think that many people already installed it. So, the best way is to give it a try, and post your findings and headaches here. I would say, good ...

Hello,

For NetBSD on the TT, check out this site :
http://netbsd-ataritt.wikia.com/wiki/NetBSD_on_the_Atari_TT030

I think this site is a good starter, and I which you good luck with the Falcon.

Mark

Yes, can you send me the info concerning the revision of the driver ? I've an official version of Milanblaster, and after contact the creator told me that only one version was made. Also strange is the following : When I check the log file created by Magic at the boot sequence, it says that the XBIO...

Maybe, he can also tell me how you can capture a part of the 'Milan' screen, and show it in a browser.
The browser is probably on an external computer active.

I have also a Milan with Milanblaster installed, with a soundblaster ISA card. I never got a PCI sound card working on my Milan Anyhow, I've executed the program and for sound it shows value 4 : 16 bit CODEC XBIOS was not marked with 'x' in the overview list. BTW, I use Milanmagic and Aniplayer does...

Honestly, I don't know.
However, I just bought 2 cards by LOTHAREK.
If they arrive I let run the same tests on my TT and Falcons. Then we can see how they behave.
I'll keep you in touch.

On the photo I cannot see the described fault. For me it looks more a network configuration error. In the past, till the lightning :( , I got a working Netusbee on my TT. However, it worked well with a D-link router (Dl-624), but not with a sitecom. When I replaced the netusbee with an ethernec card...

Hello,

Power is by romport.

Hello,

Thanks for the advice.
Yesterday night (technically-today in the early morning), I checked both of them on my falcon, with the same results.
So, the possibility that the failure is on TT, is ruled out.

Kind regards,

Mark

Hello, I've 2 netusbee's from the first batch, made in 2006. In the past I used the network adapter, and the USB adapter with a "Microsoft wheel mouse optical". As USBdriver I used umouse from Jan Thomas. This configuration worked fine on my TT for years. Recently, I don't know what I've d...

Hello,

Check this :
My URL was last updated on : : 7 Mar 2012
Yours : updated: 18 Mar 2010

Regards,

Mark

Last time, when I installed Mint, I followed this site : https://sites.google.com/site/probehouse/mint-os-for-atari/installing-mint It's for me the best manual on site. I use Mint only for networking and multitasking and as desktop Gemini, with as less Unix-like environment as possible. Long agoo, I...

Hello,

Thanks for the reply.
Did you adjust some settings in mint ?
And what version of mint are you using ? I use 16.1

Kind regards,

Mark

Hello, I try to play some webradios on my CT60 Falcon. However without success. I use Falcamp under mint. It can play the M3U files, but ather a while the buffer runs low, and Falcamp locks. I use mintnet, and gluestik. - Are some people out there with more succes ? - Is there another program I can ...