Search found 1350 matches

by mikro
Fri Jan 19, 2018 11:47 am
Forum: Hades / Milan
Topic: ST emulators on Milan
Replies: 13
Views: 468

Re: ST emulators on Milan

Aranym is mainly intended to run clean programs, and not any demos/games that use lot of hardware tricks, so that does not make much sense. The MIlan is exactly the same case. That's why the ST emulator to run the ST games and demos is needed. Unfortunately, the real 68040 and, I'm afraid, 68060 to...
by mikro
Fri Jan 19, 2018 11:45 am
Forum: Hades / Milan
Topic: ST emulators on Milan
Replies: 13
Views: 468

Re: ST emulators on Milan

The Aranym users would definitely profit from that too. Aranym is mainly intended to run clean programs, and not any demos/games that use lot of hardware tricks, so that does not make much sense. And it only emulates a '040 cpu, so any programs that have problems with that will most likely don't wo...
by mikro
Fri Jan 19, 2018 12:47 am
Forum: CT60 / CT63 Area
Topic: CTPCI and USB card
Replies: 85
Views: 6304

Re: CTPCI and USB card

You're right, this deserves some conclusion. The first thing is to name the problem precisely, there are three separate problems: ⋅ CTPCI+USB keyboard/mouse (beginning of this thread) ⋅ CTPCI+network card (http://www.atari-forum.com/viewtopic.php?f=97&t=31641) ⋅ 060...
by mikro
Thu Jan 18, 2018 11:43 pm
Forum: CT60 / CT63 Area
Topic: A solution for rare 68060s?
Replies: 4
Views: 251

Re: A solution for rare 68060s?

Hm, you're right, silly me. Should have looked better. Anyway, the idea is still pretty interesting.
by mikro
Thu Jan 18, 2018 9:56 am
Forum: MIDI Software and Hardware
Topic: Writing Cubase drivers! (new MIDI interface)
Replies: 12
Views: 371

Re: Writing Cubase drivers! (new MIDI interface)

Foxie, before starting a joint venture with charles, I'd recommend to read some of the posts he'd made in the past. ;)
by mikro
Wed Jan 17, 2018 11:54 pm
Forum: CT60 / CT63 Area
Topic: A solution for rare 68060s?
Replies: 4
Views: 251

A solution for rare 68060s?

https://github.com/amigabill/fp68060

Unfortunately it doesn't mention for *which* FPGA 060 project (or I've missed it during my brief check) but an interesting project nevertheless.
by mikro
Wed Jan 17, 2018 11:42 pm
Forum: Games - General
Topic: Which games could be possible on our Ataris today ?
Replies: 12
Views: 634

Re: Which games could be possible on our Ataris today ?

I’ve read here that a CT60 Falcon would equal a pentium @90 Mhz or so. One might assume the Falcon should be able to handle pc vga games requiring a pentium and below ? If you look at Quake port by Mikro, then yes :) Falcon CT60 can be compared to Pentium PC systems... With SuperVidel - absolutely....
by mikro
Wed Jan 17, 2018 12:42 am
Forum: Coding
Topic: Apple G5 Powermac Atari
Replies: 12
Views: 475

Re: Apple G5 Powermac Atari

It is like when Apple switched from IBM to Intel nothing worked and everything had to be rewriten evenually. Erm, no. There was an emulator included in the operating system. It happened twice, btw: m68k -> PPC and PPC -> Intel. In both cases the transition was made via an emulator. So I'm asking wh...
by mikro
Wed Jan 17, 2018 12:39 am
Forum: CT60 / CT63 Area
Topic: Sell the last 5 CTPCI
Replies: 4
Views: 305

Re: Sell the last 5 CTPCI

I agree, CTPCI definitely has its potential but its usefulness is way more connected to software support (read: people willing to write drivers) than, say, SuperVidel (which is usable basically out of the box with a few patches to NVDI).
by mikro
Tue Jan 16, 2018 11:09 pm
Forum: CT60 / CT63 Area
Topic: Sell the last 5 CTPCI
Replies: 4
Views: 305

Re: Sell the last 5 CTPCI

Just a bit of advice, don't sell it all to one person (we all remember what happened to the Falcons you'd sold in one batch -- that person just put them on eBay for 10x higher price...).
by mikro
Tue Jan 16, 2018 11:06 pm
Forum: Coding
Topic: Apple G5 Powermac Atari
Replies: 12
Views: 475

Re: Apple G5 Powermac Atari

And what would you run there, Simie? No software would run without an emulator. In that case it makes sense to run the emulator natively. ;-)
by mikro
Tue Jan 16, 2018 8:46 am
Forum: Games - General
Topic: Which games could be possible on our Ataris today ?
Replies: 12
Views: 634

Re: Which games could be possible on our Ataris today ?

Definitely the first GTA would be doable on the CT60, maybe even 030 with some compromises.
by mikro
Tue Jan 16, 2018 6:45 am
Forum: Coding
Topic: Apple G5 Powermac Atari
Replies: 12
Views: 475

Re: Apple G5 Powermac Atari

I know that the Amiga has a version of its OS running natively on Apple gear. If you are referring to MorphOS that's because it's a PPC-targeted OS. AFAIK support for the true AmigaOS 4.x (another PPC OS, by the way) is just a hack, works only on specific Mac models and IIRC in version 4.0 only. Fr...
by mikro
Mon Jan 15, 2018 10:48 pm
Forum: Hades / Milan
Topic: ST emulators on Milan
Replies: 13
Views: 468

Re: ST emulators on Milan

Well, obviously Hatari will :-) But awfully slow. I have been thinking for years to accept the challenge to use m68k native features and emulate "only" the rest but it has many quirks which may make the task impossible. Plus there's the question of feasibility of such plan (target audience...
by mikro
Mon Jan 15, 2018 12:47 am
Forum: For sale / Wanted
Topic: Best Electronics
Replies: 22
Views: 1637

Re: Best Electronics

Public plea for help: if anyone can mention my name to him (Miro Kropacek) and ask him whether he can check his mailbox, I would owe you one. Getting a reply like "Yeah, I hate him" is totally OK :), I just want to be sure it's not a technical issue.
by mikro
Sun Jan 14, 2018 3:10 am
Forum: CT60 / CT63 Area
Topic: CT60, updating ABE and/or SDR, JTAG device error !
Replies: 12
Views: 480

Re: CT60, updating ABE and/or SDR, JTAG device error !

The JTAG device is the same as this, "Other way : make the cable yourself", document describes. I think this must be the culprit then. The only difference to your steps I had done in the past is that I'd bought a new one and just connected the pins. Maybe the schematics is wrong, maybe yo...
by mikro
Sat Jan 13, 2018 11:03 pm
Forum: SuperVidel
Topic: [Q] Setting video mode with Falcon compatible resolution
Replies: 6
Views: 928

Re: [Q] Setting video mode with Falcon compatible resolution

I think the chunky modes should be without the bit set as well.

By the way, while are you at it, why not add the extended video resolutions as well? I documented it a while ago here: https://github.com/freemint/mintlib/blo ... con.h#L173
by mikro
Sat Jan 13, 2018 11:27 am
Forum: Hatari
Topic: Underscore character
Replies: 4
Views: 308

Re: Underscore character

Apart from the custom mapping, there's far more easier method (at least it works for me every time I see something else printed): change "Keyboard mapping" from "Symbol" to "Scancode" in the Keyboard menu. That way I always get the symbol I want.
by mikro
Sat Jan 13, 2018 2:09 am
Forum: Games
Topic: Centron3D for Falcon030 Update.
Replies: 17
Views: 1179

Re: Centron3D for Falcon030 Update.

Too bad I didn't know about you earlier! I lived in Brisbane for nearly two years. Maybe you'd be interested to visit our Atari meetups: viewtopic.php?f=28&t=30705 ? IIRC, the next one should be in February.
by mikro
Sat Jan 13, 2018 1:36 am
Forum: CT60 / CT63 Area
Topic: Rodolphe Czuba's websites mirrored & fixed
Replies: 26
Views: 3076

Re: Rodolphe Czuba's websites mirrored & fixed

As I said, anyone willing to clean this mess is more than welcome. I just made sure the website links are all working. OK, I had a spare moment so I have fixed it all for good. I have also added fallback links (CT60 -> ct60 etc) so now it should really work no matter what your original URL was. The...
by mikro
Sat Jan 13, 2018 12:25 am
Forum: Games
Topic: Centron3D for Falcon030 Update.
Replies: 17
Views: 1179

Re: Centron3D for Falcon030 Update.

Is it just me or there's suddenly quite a few new faces coming from down under? :)
by mikro
Sat Jan 13, 2018 12:23 am
Forum: CT60 / CT63 Area
Topic: Rodolphe Czuba's websites mirrored & fixed
Replies: 26
Views: 3076

Re: Rodolphe Czuba's websites mirrored & fixed

Yeah, an unfortunate side effect of Windows hosting -- on disk it's "CT60" but the original link was "ct60" (which is cached by Google). I fixed a lot of them but cached results persist. :-/ As I said, anyone willing to clean this mess is more than welcome. I just made sure the w...
by mikro
Sat Jan 13, 2018 12:17 am
Forum: SuperVidel
Topic: [Q] Setting video mode with Falcon compatible resolution
Replies: 6
Views: 928

Re: [Q] Setting video mode with Falcon compatible resolution

Thanks Peter for your input! Actually it was me who started making accusations of Patrice's SDL :-P. We have been testing some video setups on my SuperVidel and I was getting just blank screens without anything, we couldn't figure out what's wrong for weeks.
by mikro
Sat Jan 13, 2018 12:15 am
Forum: CosmosEx
Topic: Fake STing - what works, what doesnt?
Replies: 2
Views: 225

Re: Fake STing - what works, what doesnt?

Its author is Jookie: https://github.com/atarijookie/ce-atari ... _fakesting

And sure as hell it can be improved. ;)
by mikro
Sat Jan 13, 2018 12:10 am
Forum: Coding
Topic: STE horizontal hardware scroll
Replies: 24
Views: 929

Re: STE horizontal hardware scroll

A fun fact: Atari800's Display List do this "natively", you can really specify each line with its own address. When I switched to ST/Falcon I was shocked that the "better" Atari lacks this feature completely! (I learned only much later that the ST is definitely not a better compu...

Go to advanced search