Search found 165 matches

by Saturnin51
Mon Feb 04, 2019 4:14 pm
Forum: Hardware
Topic: External clock audio Falcon
Replies: 4
Views: 1358

External clock audio Falcon

Hi,

I am looking for the schematic of an external clock connected to the DSP port of the Atari Falcon.

Thanks.
by Saturnin51
Mon Feb 04, 2019 3:29 pm
Forum: Hardware
Topic: Issue with a Soundpool Analog8
Replies: 10
Views: 1714

Re: Issue with a Soundpool Analog8

Thank for your answer. A friend of mine examined the two boards and he said to me he thank the issue was on the clock of the FDI. The Analog8 seems OK. I could verify that building an external clock and a cable DSP femelle 15 pins (to the Analog8) - DSP board femelle 26 pins on which the external cl...
by Saturnin51
Sat Feb 02, 2019 3:35 pm
Forum: Hardware
Topic: Issue with a Soundpool Analog8
Replies: 10
Views: 1714

Re: Issue with a Soundpool Analog8

Does anyone know the references of the integrated circuits of this board. Because they had been canceled !
by Saturnin51
Thu Jan 31, 2019 1:39 pm
Forum: Hardware
Topic: Issue with a Soundpool Analog8
Replies: 10
Views: 1714

Re: Issue with a Soundpool Analog8

You can find the snapshots HERE
by Saturnin51
Wed Jan 30, 2019 10:46 am
Forum: Hardware
Topic: Issue with a Soundpool Analog8
Replies: 10
Views: 1714

Re: Issue with a FDI Steinberg

The set up is the same. I use Cubase Audio Falcon 2.06 with dongle. After a long thinking, I am not a specialist, I think the FDI runs well. Into Cubase I can change the frequency from 44 MHz to 16 MHz. I have a serious look to the Analog8 card and I find out several burn on the printed circuit, und...
by Saturnin51
Tue Jan 29, 2019 8:54 am
Forum: Hardware
Topic: Issue with a Soundpool Analog8
Replies: 10
Views: 1714

Re: Issue with a FDI Steinberg

This FDI ran perfectly until I use again my FAlcon audio setup yesterday after several ,monthes of inactivity.
by Saturnin51
Mon Jan 28, 2019 5:56 pm
Forum: Hardware
Topic: Issue with a Soundpool Analog8
Replies: 10
Views: 1714

Issue with a Soundpool Analog8

Hi everybody, I am going to sell my combo Soundpool Analog8 + FDI Steinberg. But unfortunetly the FDI seems to be out of order. The soundpool is OK, all the voices are correctly outed but with a wrong speed. I use an external clock directly on the Falcon and the speed is OK in this case but the audi...
by Saturnin51
Thu Mar 29, 2018 7:14 pm
Forum: Hardware
Topic: CF card + HDDRIVER 10.02 in Falcon
Replies: 15
Views: 5619

Re: CF card + HDDRIVER 10.02 in Falcon

My choice to have an easy way to exchange between my Falcon and my PC (with Ubuntu Linux system) was to choose Bigdos + Hddriver 7.8, in order to manage Dos compatible partitions up to 2 Go, particulary with a Iomega Jazz on the Falcon and also on the PC. The cartdriges are directly readable on both...
by Saturnin51
Sat Mar 10, 2018 5:56 pm
Forum: Professionals
Topic: VGA adapter with Blow Up and VGA/RGB switch
Replies: 176
Views: 55264

Re: VGA adapter with Blow Up and VGA/RGB switch

I don't understand what you say.

I try to play with left and right blank, Hsync and XRes with any result. The screen is always larger than 1024 !
by Saturnin51
Fri Mar 09, 2018 1:15 pm
Forum: Professionals
Topic: VGA adapter with Blow Up and VGA/RGB switch
Replies: 176
Views: 55264

Re: VGA adapter with Blow Up and VGA/RGB switch

Here the parameters I use with Blowconf: http://rmor.free.fr/Atari/P1010009.JPG

It seems that the two values left blank (92) and right blanck (104) are not used. So the screen is 1220 pixel and not 1024. Could you give me the line of your standard.bcf for this resolution please ?
by Saturnin51
Thu Mar 08, 2018 5:39 pm
Forum: Professionals
Topic: VGA adapter with Blow Up and VGA/RGB switch
Replies: 176
Views: 55264

Re: VGA adapter with Blow Up and VGA/RGB switch

True. I wanted to say default.bcf. I omitted also the end of the last phrase: with Papyrus, I can't see the right windows lift by example.
by Saturnin51
Thu Mar 08, 2018 1:44 pm
Forum: Professionals
Topic: VGA adapter with Blow Up and VGA/RGB switch
Replies: 176
Views: 55264

Re: VGA adapter with Blow Up and VGA/RGB switch

Could someone tell me how to get a true 1024*768 with the 3-IN-1 card ? With the modified standard.bcf It seems to be a 1216*784 and I can't see the right windows lift.
by Saturnin51
Mon Mar 05, 2018 1:42 pm
Forum: MIDI Software and Hardware
Topic: Steinberg SMP II Operation with Falcon CAF
Replies: 9
Views: 5563

Re: Steinberg SMP II Operation with Falcon CAF

Here the model of my mechanical switch box.
by Saturnin51
Sat Mar 03, 2018 8:05 pm
Forum: Hardware
Topic: Falcon Video extension
Replies: 14
Views: 2460

Re: Falcon Video extension

Thank you very much. I'll let you know the result as soon as I'll do this work.
by Saturnin51
Sat Mar 03, 2018 12:20 pm
Forum: Hardware
Topic: Falcon Video extension
Replies: 14
Views: 2460

Re: Falcon Video extension

No change. I try to put aluminium paper around grounded. No change.

I have a VGA cable and an another with 10 wires and shielding.

Could it be possible to imagine a connecting schema with 15 or 10 wires ?
by Saturnin51
Fri Mar 02, 2018 7:55 pm
Forum: Hardware
Topic: Falcon Video extension
Replies: 14
Views: 2460

Re: Falcon Video extension

The extension is 30 cm long and I use a Peritel cable (20 wires + ground).

the extension
by Saturnin51
Fri Mar 02, 2018 2:52 pm
Forum: Hardware
Topic: Falcon Video extension
Replies: 14
Views: 2460

Re: Falcon Video extension

I wire again the DB19. The connection is OK with the VGA 3-IN-1 but with ondulations on the screen at starting en then pairs of vertical lines into the gem windows

Screen without extension

Screen with extension with onduulations and pairs vertical lines
by Saturnin51
Thu Mar 01, 2018 2:06 pm
Forum: Hardware
Topic: Falcon Video extension
Replies: 14
Views: 2460

Re: Falcon Video extension

When I finish all solders, yes.
by Saturnin51
Wed Feb 28, 2018 12:32 pm
Forum: Hardware
Topic: Falcon Video extension
Replies: 14
Views: 2460

Re: Falcon Video extension

I'll try to wire again the connectors. It is not difficult to identify the pins with their numbers on the connector. So I don't understand why the extension doesn't run.
Must the ground be soldered on the carcass of the two connectors ?
by Saturnin51
Tue Feb 27, 2018 7:54 pm
Forum: MIDI Software and Hardware
Topic: Do you use/need more than one MIDI input?
Replies: 23
Views: 8428

Re: Do you use/need more than one MIDI input?

I have a SM24. It is plugged to the Falcon by the printer port.
I plug on the SMP24 two devices on the MIDI IN (keybord and drum) and three expanders on MIDI OUT.
I use the Falcon MIDI ports when I use an editor with an expander, IN and OUT/THRU.
by Saturnin51
Tue Feb 27, 2018 10:21 am
Forum: Hardware
Topic: Falcon Video extension
Replies: 14
Views: 2460

Re: Falcon Video extension

No, I want just an extension for the Falcon video port. I bought the VGA 3-IN-1 device on this forum. It is about 5 cm long and I just want to deport the video port in order to connect this device not behind the Falcon but above.
by Saturnin51
Tue Feb 27, 2018 9:42 am
Forum: Hardware
Topic: Falcon Video extension
Replies: 14
Views: 2460

Falcon Video extension

Hi,

I bought 2 DB19 (male and female) in order to make a video extension and connect the VGA 3-IN-1 over the Falcon and not behind.

I wired the 19 pins to obtain a direct link. But it does not work.

Could someone do me schema wiring please ? Thank you for your help.
by Saturnin51
Thu Feb 22, 2018 9:23 am
Forum: Professionals
Topic: VGA adapter with Blow Up and VGA/RGB switch
Replies: 176
Views: 55264

Re: VGA adapter with Blow Up and VGA/RGB switch

Is there anybody out there ?
by Saturnin51
Mon Feb 19, 2018 10:43 am
Forum: MIDI Software and Hardware
Topic: Master Score II (Steinberg).
Replies: 6
Views: 7177

Re: Master Score II (Steinberg).

I have a copy but with dongle needed: HERE
by Saturnin51
Mon Feb 19, 2018 9:55 am
Forum: Professionals
Topic: VGA adapter with Blow Up and VGA/RGB switch
Replies: 176
Views: 55264

Re: VGA adapter with Blow Up and VGA/RGB switch

Hi, With the 1024x768 resolution, how is it possible to avoid having as a virtual screen on the right edge of the screen? The mouse cursor does not stop at the right edge of the screen. And what are the values 1216 and 772 found in the STANDARD.BCF and we retrieve into the BLOWCONF screen as W and H...

Go to advanced search